Always read all safety warnings and instructions.
Failure to follow warnings and instructions may result in electric
shock, fire and/or serious injury.
GENERAL MACHINE SAFETY WARNING
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
SAFETY REQUIREMENTS
1.
Always wear eye and ear protection as well as cut
-
resistant gloves.
Other per-
sonal protective equipment, such as dust mask, gloves and overalls should be
worn when necessary. Dust produced when working can be dangerous to your
health, inflammable or explosive. Always wear appropriate protective equipment.
Make sure the drain pipe has been opened and ventilated to stop any gases forming in the lateral drain where the
work takes place.
3.
Always ensure that the machine is fully turned off and unplugged before inspection, maintenance, or installing any
accessories to the machine. Always follow the instructions in the Picote Solutions manual.
4.
Before each use
inspect the machine carefully for any potential break or damage.
Change damaged parts immedi-
ately.
It is especially important to check the end of the flexible power shaft for any signs of wear and tear, and re-
peat the process for the outer casing.
5.
When in use, it is very important that the machine is stable and on an even surface at all times.
6.
Never leave the machine running unattended
. Always hold the cable when operating the machine.
7.
Do not touch
the Cutter or Grinding Chains immediately after use; they may be hot and could burn your skin.
8.
If the working environment is extremely hot and humid, or badly polluted by conductive dust, use a GFCI
-
enabled
power outlet to ensure the safety of the operator.
9.
Make sure that the job location is well ventilated before grinding or drilling. Always use a vacuum extraction sys-
tem in the pipe to remove dust. The operator must wear a dust mask when using dry grinding to clean pipes.
10.
Ensure that the ventilation openings are kept clear when working in dusty conditions. If it should become neces-
sary to clear dust, first unplug the machine. Avoid damaging internal parts.
11.
Do not use the machine on any materials containing asbestos.
12.
Never touch rotating parts
. Do not stand on the machine.
13.
Only use this machine with the accessories and spare parts offered by the Picote Solutions. Accessories and spare
parts should only be used in the manner intended and as described by the Picote Solutions.
14.
Only operate the foot pedal or OPC as instructed. Never place anything on it in place of a foot.
15.
Do not extend the shaft by more than one extension (10m/33ft). Use only shaft extension and connectors manu-
factured by Picote Solutions.
4
Picote Solutions Oy Ltd www.picotesolutions.com
This section contains important safety information. Failure to comply could result in serious injury.
This section contains important safety information. Failure to comply could result in serious injury.
