Picote Solutions Oy Ltd
5
TRANSPORT
Midi Miller should be transported in car or other vehicle laid down and secured with ratchet straps to prevent any sud-
den movements or accidents caused by hard braking or accident.
Never transport machine with tool attached to the shaft.
If using pick
-
up or trailor to transport Picote milling machines, cover the unit to protect it from raining water and dust.
STORAGE
Midi Miller should be strored under cover in b10
o
C to +40
o
C (50
o
F to 104
o
F). It is recemmended that milling
machines are stored indoors protected from rain and sunlight and in constant temperature. Best way to store the
machines is in the same box that the machine has been shipped.
If Midi Miller will be stored in colder environment than +10
o
C (50
o
F ), the milling machine should be stood at room
temperature for 24hours before use.
If Midi Miller has been stored for long periods of time (over 2
-
3 months), it should be checked and tested according to
maintence program before use.
This section contains important safety information. Failure to comply could result in serious injury or death.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
DISPOSAL
Midi Miller motor, control box, electric wires and axle package including slip ring can be disposed in Europe at Waste
Electrical and Electronic Equipment (WEEE) collection points. Miller frame, reel and shaft can be recycled in metal waste
collection points. Outer casing of the shaft can be disposed of as plastic waste.
Always follow the local waste handling rules and regulation.
