SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
REPAIRING DAMAGED CABLE
-
JAW END
www.picoteinstitute.com
Picote Solutions Oy Ltd
11
14
8. Trim the inner casing to the same length as the outer casing. Approximately 5mm
(0.2”)
of the inner
casing should be showing (see below). Push the wire back inside and screw the handle all the way in.
9. Screw the Jaw Head back on to the outer casing. A vice helps hold it in place.
10. Replace the spring and the wire holder.
Do not
tighten the wire holder yet.
11. Put the Jaws back and tighten the Jaw
screws.
