IR-transmitters Pico4, Pico8 and Pico16
Page 12
Keys on page 1/2
This is access to settings for each page; choose which page to
make settings on.
•
Page 1 will always be enabled.
•
Page 2 can be disabled. On a Pico16, the page-select key
will have no function.
•
Page 2 can be enabled. On Pico4 and Pico8 the lower left
key will be a page select key without any IR function.
General settings
General settings for the IR-transmitter.
IR signal
Choose which IR-signals to transmit. It is possible to choose
between built in IR-signals and to copy IR-signals from other
transmitters. In chapter 3.8 the IR-signals which is preset in
factory setting is listed.
Picomed
Picomed’s IR-format («IR-language»).
User Code
Choose one of 32 user-codes, values from 00-31.
Channel
Choose one of 16 channels, values from 00-15.
Pre-set door phone
Choose a pre-set user code (05) and channels (13-15) used to
control Picomed’s door phone Picolo.
Pre-set phone
Choose a pre-set user code (05) and channels (00-15) used to
control Picomed’s telephone PicoPhone.
Gewa
Gewas IR-format («IR-language»).
Channel
Choose one of 128 channels, values from 00-127.
Learn/copy IR
Menu for learn/copy IR-signals from another IR-transmitter.
Please also refer to chapters 3.6 and 4.3.
Test
Transmits the IR-signal, for testing in learning mode.
Continuous IR
If enabled, it will repeat the IR-signal until key is released. If
disabled, it will transmit the IR-signal once even though a
key is pressed for a long time.
Delete IR
Delete all IR for a key/page.
Individual key
Settings for an individual key on chosen page.
Choose key
Choose an individual key on chosen page.
Lock Code
If enabled, it will transmit lock-code. More information can
be found in chapter 2.5. Only available for individual key
«lock-code» placed in lower right corner on transmitter.
Common code before LC?
If enabled, it will transmit a common-code before the lock
code when lock code key is pressed. See chapter 2.5 and
2.5.1. Only available for individual key «lock-code» placed
in lower right corner on transmitter.
•
If key is programmed with a Picomed IR-signal, it will
transmit Picomed common code.
•
If key is programmed with a Gewa IR-signal, it will
transmit Gewa common code.
