3
How to use the Manual
Remark:
Please read all instructions before powering up the device.
Please see section “Power Dissipation” for more details about thermal power losses
during operation.
Please pay attention to all safety warnings.
If you have any doubt or suggestion, please do not hesitate to contact us!
Absolute maximum Ratings (destroying limits)
All input pins may not exceed the voltage range below zero (GND) and beyond
VCC, resp. 5 V TTL.
VCC limit: see table in section “Power Supply (#1)”
Peak output current: 5.0 A
Operating temperature range: 0 °C .. +60 °C
Best performance operating temperature range: +10 °C .. +35 °C
Storage temperature range: -20 °C .. +70 °C
Dos and Don’ts
Never ground any output connector.
Never use any grounded probes at the output.
Do not connect your oscilloscope to the output!
Driver and the probe will immediately be destroyed!
Keep the connecting cables between power supply and driver as well as between
driver and laser diode as short as possible.
Be aware of hot surfaces! Do not touch!
Summary of Contents for LDP-VRM 045-12 CA
Page 4: ...4 ...
