74
75
pico c instruction manual
Remove the white plastic shipping plug from the center
of the Serving Keg Bung Hole.
If you are reusing your Serving Keg after first use, we
recommend sanitizing the keg with Star San solution.
Pour 0.5 cups of Star San solution into the Serving Keg
and close the keg with the shipping plug. Shake the
Serving Keg and let it sit for 2 minutes. Empty the keg
contents in the bucket and set aside to dry.
Note:
Star San is available on
www.picobrew.com/
BrewGear
. Follow all manufacturer's instructions
when using Star San. If you do not have Star San, you
can alternatively use a hydrogen peroxide solution (1.5
cups of clean tap water and 1.5 cups of 3% hydrogen
peroxide). Make sure to let your Serving Keg air dry
after sanitizing with hydrogen peroxide. Using sanitizer
solutions other than Star San may result in off flavors.
₁
Clean the Racking Tube by placing it in the
dishwasher or soak the Racking Tube for 2
minutes in the bucket of sanitizer solution you
set aside earlier.
proceed to next section:
rack the beer
₂
unboxing
setup
first
rinse
let's
brew
after
brewing
ferment
your beer
dry
hopping
ra
ck &
carbona
te
serving
usa
ge &
care
sous vide
glossary
Summary of Contents for C
Page 82: ...brewingnotes brewingnotes ...