Linkwise Technology Pte Ltd REX User Manual
Placing or Moving – Do not place this device on an unstable cart, stand, tripod, bracket or table.
The device may fall and cause serious damage to itself and serious injury to others. A device and
cart combination should be moved with care. Quick stops, excessive force and uneven surfaces
may cause the device and cart combination to overturn.
Power Sources – The AC adapter should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your premises, consult your
device dealer or local power company.
Power Cord Protection – Power cords should be routed so that they are not likely to be walked on,
or pinched by items placed upon or against them. Pay particular attention to plugs and the point
from which the cords exit the device.
Outdoor Antenna Grounding – If an outside antenna is connected to the device, be sure the antenna
is grounded so as to provide some protection against voltage surges and built-up static charges.
Lightning – For added protection of this device during a lightning storm, or when it is left unattended
and unused for long periods of time, disconnect it from the wall outlet and disconnect the antenna.
This will prevent damage to the device due to lightning and power-line surges.
Power Lines – An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from touching
such power lines or circuits, as contact with them might be fatal.
Overloading – Do not overload wall outlets and extension cords as this can result in a risk of fire or
electric shock.
Object and Liquid Entry – Never push objects of any kind into this device through openings as they
may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Be
careful not to spill liquid of any kind onto the device.
Servicing – Do not attempt to service this device yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified personnel.
Opening the cover may void your warranty.
Do not install the device in the following locations as this can cause a fire or electric shock:
Hot locations
Close to a fire
Very humid or dusty locations
Locations exposed to direct sunlight
Locations exposed to salt spray
Close to flammable solvents (alcohol, thinners, etc.)
If any of the following occurs, immediately switch the device OFF, unplug it from the main power
supply and contact your distributor or agent:
The device emits any smoke, heat, abnormal noise, or unusual odour
A metal object falls into the device
The device is damaged in some way
Do not continue to use the device as this can cause a fire or electric shock.
Please observe the following when using the device. Failure to do so can result in a fire or electric
shock.
Do not use flammable sprays near the device.
Do not subject the device to strong impact.
