Operation
28
© 2017 Pico Technology
pv106ug r1
Select the channel to set up by clicking the appropriate radio button under
Select
Choose the desired parameter to display on this channel from the drop-down list under
Parameter / Graph
Type
Choose the desired graph type from the drop-down list under
Parameter / Graph Type
Select the vertical axis values from the
Vertical Axis
section. Optionally, click
Autoscale
to automatically
set the sensitivity and reference values. Note that reference position 1 is at the top (see second figure
below).
Click
Apply
to apply the selected values
Repeat the above steps for each display needed
Note:
The Active Channel must be one of the displayed channels.
The Display Set Up window is used to set up the measurements display
Display graph parameters
