pico Technology PicoSource PG900 Series User Manual Download

Page: 7 / 56

PicoSource PG900 Series User's Guide

pg900ug.en r1

1.3.1

Symbols

These safety and electrical symbols may appear on the product or in this guide.

Symbol

Description

Direct current

Alternating current

Earth (ground) terminal
This terminal can be used to make a measurement
ground connection. It is not a safety or protective
earth.

Chassis terminal

Possibility of electric shock

Caution
Appearance on the product indicates a need to read
these safety instructions.

Static awareness. Static discharge can damage parts.

Do not dispose of this product as unsorted municipal
waste.

WARNING

To prevent injury or death use the product only as instructed and use only
accessories supplied or recommended. Protection provided by the product
may be impaired if used in a manner not specified by the manufacturer.

Summary of Contents for PicoSource PG900 Series
























































Search results

Summary of Contents for PicoSource PG900 Series

Reviews:

Related manuals for PicoSource PG900 Series

Brands by name

Popular brands

pico Technology PicoSource PG900 Series, User Manual

Search results

Summary of Contents for PicoSource PG900 Series

Reviews:

Related manuals for PicoSource PG900 Series

Brands by name

Popular brands