background image

1

Fiber Optic

Series

1

CONTACT US 

858.546.5050

www.

picomacom

.com

PICO MACOM

Fiber Optic

Series

Limited Warranty

Pico Macom warrants to the original purchaser that all of its new products are of sound design, quality 
materials and workmanship at the time of manufacture and will be free from related defects for one 
year from the original purchase date. Pico Macom will repair or, at its discretion, replace without cost 
to the original purchaser, the product which, upon inspection by Pico Macom, appears to be defective 
or not conforming to factory specifications. Pico Macom will cover the cost of parts, labor, and return 
freight from factory.

Five-Year Limited Warranty

Most products designated as “Headend Electronics” are further covered by an extended 4-year period 
beyond the expiration of the original 1-year warranty, for a full 5-year period. Qualified equipment re-
quiring factory repair during the extended 4-year period is covered under our re-certification program. 
Re-certification fees under this program shall not to exceed 20% of the product’s List Price and when-
ever possible, Pico Macom will attempt to upgrade performance to the latest improved specification.

Warranty Limitations

This warranty excludes coverage of damage or inoperability resulting from (1) use or installation other 
than in strict accordance with Pico Macom’s written instructions, (2) disassembly or repair by some-
one other than Pico Macom or a Pico Macom authorized repair center, (3) misuse, misapplication or 
abuse, (4) alteration, (5) lack of reasonable care or (6) wind, ice, snow, rain, lightning, power surges, 
or any other weather conditions or acts of God. Pico Macom’s warranty with respect to third-party pro-
prietary sub-assembly modules and/or private-label products are limited to the duration and terms of 
third-party vendors’ warranty. Pico Macom shall in no event and under no circumstances be liable or 
responsible for any consequential, indirect, incidental, punitive, direct or special damages based upon 
breach of warranty, breach of contract, negligence, strict tort liability or otherwise or any other legal 
theory, arising directly or indirectly from the sale, use, installation or failure of any product acquired by 
buyer from Pico Macom. This limited warranty extends to the original purchaser. Pico Macom reserves 
the right to modify or discontinue this warranty at Pico Macom’s sole discretion without notification. 
No other warrantees are expressed or implied.

Uptime Loaner Program

Our Uptime loaner program is designed to provide domestic users of our headend products and com-
mercial systems the best possible support and service. This program is established to minimize down-
time resulting from equipment failure in critical service situations. We offer this program free-of-charge 
(excluding freight) to qualified purchasers within the warranty period. The program provides a free 
equipment loan of like qualified equipment enabling seamless operation for the time required to repair 
and return the unit.

The process is simple. Call our Customer Service desk requesting a return-merchandise-authorization 
(RMA) number for the failed equipment and ask for a loaner unit. We will issue an invoice for the List 
Price of the loaner unit plus shipping costs. When you receive the loaner unit, pack the failed unit in 
the loaner unit’s box and ship it freight prepaid to Pico Macom for repair. When you receive the re-
paired unit, a new RMA number will be provided in the box. Carefully pack the loaner unit and affix 
the new RMA number on the box and ship it back to us for full credit excluding shipping costs.

Summary of Contents for PFT-10



















Reviews: