Page 1.2
6-CHANNEL BATTERY SIMULATOR MODULE 41-752
pickering
SECTION 1 - TECHNICAL SPECIFICATION
pickering
test
.com
Power Requirements from PXI Power Supply
+3.3V
+5V
+12V
-12V
0.8A
2.0A
0.6A
0.3A
At maximum load for all channels,
Recommended chassis are 60-103 and 60-103A or 40-923
and 40-923A for applications requiring many modules (up to
18 off) in a single chassis to avoid chassis limitations.
Specification
Number of Channels:
6 independent isolated channels.
Output Voltage Range:
0 to 7V, settable with 14-bit
resolution (approximately 0.43mV).
Output Voltage Accuracy: ±0.2% ±20mV from 1V to 7V output
over ambient temperature range
+11°C to +31°C.
Isolation Voltage:
±750V
Output Current:
Up to 300mA per channel for
voltages from 2.5V to 7V
Linearly de-rate to 200mA into a
short circuit below 2.5V without
thermal shutdown.
Current Sink:
Variable current sink permits
the output to be loaded so the
battery simulator can sink current
from a charger. Current sink can
be set from 0 to 100mA in 16
steps. Current sink setting reduces
the current available at the user
connector.
Output Connections:
Vout+, Vout- and two sense inputs
for each simulator channel.
Sense inputs detect output voltage
at front panel connector if no
remote sense lines are connected.
Load Response Time:
250µs
Power Source:
PXI bac12V, +5V, +3.3V
and -12V.
Protection:
All simulators are short circuit
protected, reverse voltage
protected and include thermal
shutdown.
Output Connector:
37-way D-type, high voltage
PXI Characteristics
Backplane connection:
33MHz, 32-bit.
Mechanical:
3U, 1-slot.
Mating Connectors & Cabling
For connection accessories for the 41-752 please refer to the
90-007D
37-way D-Type Connector Accessories data sheet
where a complete list and documentation can be found for
accessories.
Product Order Codes
Battery Simulator, 6-Channel
41-752-001
