Pickering 40-110, User Manual

Page: 10 / 44

Page 1.1
REED RELAY MODULE 40-110/115/120/125
pickering
SECTION 1 - TECHNICAL SPECIFICATION
SECTION 1 - TECHNICAL SPECIFICATION
pickering
test
.com
PXI Reed Relay Module 40-110/115
ISSUE 10.1
APR 2018
Supported by eBIRST
eBIRST switching system test tools simplify switching system fault-
finding by quickly testing the system and graphically identifying the
faulty relay.
For more information go to:
pickeringtest.com/ebirst
• 16, 24 or 32 Reed Relays Per Module
• SPST, DPST and SPDT Configurations
• Ruthenium Reed Relays Suitable For Low Level
Signals
• Uses High Reliability Pickering Reed Relays For
Maximum Performance
• Fast Operating Speed 250µs Typical
• Switch up to 150V, 1.2A with 20W Max Power
• VISA, IVI & Kernel Drivers Supplied for Windows
• Supported by PXI or LXI Chassis
• Supported by
eBIRST ™
• 3 Year Warranty
The 40-110/115 range of switching modules are available in
both Changeover (SPDT) and Normally Open (SPST & DPST)
configurations. Connections are made via a front panel 96-pin male
micro-D connector.
General purpose reed relays are suitable for the construction of
small switching networks, for slave switching larger relays or for
operating external devices (e.g. lamps, solenoids etc.). To simplify
inter-relay wiring, interconnection points are built onto the circuit
board thus easing the construction of complicated wiring.
Range Description:
• 40-110-021 16 x SPDT Reed Relays.
• 40-110-121 32 x SPDT Reed Relays.
• 40-115-021 16 x SPST Reed Relays.
• 40-115-121 32 x SPST Reed Relays.
• 40-115-022 16 x DPST Reed Relays.
• 40-115-122 24 x DPST Reed Relays.
Schematic of 40-115 Relay Module – 16 x SPST
Schematic of 40-110 Relay Module – 16 x SPDT
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
SW9 SW10 SW11 SW12 SW13 SW14 SW15 SW16
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
SW9 SW10 SW11 SW12 SW13 SW14 SW15 SW16