PICHLER Kunststofftechnik GmbH
january 2012
page 8 of 12
Factory setting
Select the menu item "
menu customer
", default (
).
Setting secure: To On / Off
, press the button settings with secure
the "
OK
" button appears with the arrow facing up to
then "
ON
" to save the changes, once again the "
OK
"
Button. (
)
Setting load: To On / Off
settings, press the button setting overloaded with
the "
OK
" button appears with the arrow facing up to
then "
ON
" to load the changes, once again the "
OK
"
Button. (
)
Factory settings. To On / Off
(Here, the changed settings
The factory defaults are reset.
If before a backup is created, you can also re-loading!
Display contrast: 1-150
(The contrast can range from the level
1-150 be changed. Select the optimum level for you.
Pic.1
Fig. 2
Fig. 2
Warning
: Please after each change you want to backup
the setting must be secured
Beleuchtung
menu customer
back
36.7
set temp.
more settings
illumination
Intervall massage
factory setting
Intervall massage
The intervall massage setting can be found under the menu item
"
more settings
". Select "
intervall massage
."
Select the intervall for massage by "1 second" both
buttons (see „
page 2
"controls) pressed.
Clear the intervall for massage by "1 second" both
keep the buttons pressed again.
Single:
from
On
(The interval of each operating unit can massage
be separately switched „
on
“, or „
off
“.
Single user:
Off
(The intervall of each massage can control part of
all valves are on or off.
Massage duration:
0-30min
. (The massage is for the set intervall
active time and than switches off automatically).
Massage level: 1-15
(1 = slowest speed interval, 15 = fastest speed)
menu customer
back
36.7
set temp.
more settings
factory setting
illumination
intervall massage
interval massage
massage step 15
massage time 25
single seat on
Pic.1
Pic 2
„
▲
“
„
▲
“
back
factory setting
factory setting
setting save
On
setting load
userpanel contrast 90
Off
Off
back
i
