PICHLER Kunststofftechnik GmbH
january 2012
page 7 of 12
For example, filters and heating times setting
The time setting for heating and filtering should be set equal
be to keep track of the setting.
Shown is a typical setting, if during the night
no noise in residential areas are desirable.
ATTENTION:
It still needs a minimum set of filter time 15 hours
be to ensure optimum water quality.
The automatic dosing system works only when the
Filter operation!
filter times
back
1: 07:00 - 22:00
2: 07:00 - 22:00
3: 07:00 - 22:00
4: 07:00 - 22:00
back
2: 07:00 - 22:00
3: 07:00 - 22:00
4: 07:00 - 22:00
So Mo Tu We Th Fr Sa
07:00 -
heating times
1:
flashing times
back
1: 09:00 - 09:00
2: 15:00 - 15:00
3: 20:00 - 20:00
4: 22:00 - 22:00
more settings 1
date 06.07.12
time 08:22
filter time
heat time
flushing Aus
flushing time
back
more settings 1
date 06.07.12
time 08:22
filter times
heat times
flashing
o
Off
flashing times
back
more settings 2
ozon during bath On
Flushing times setting
Under the menu item "
More Settings
", select
"
Flush times
".
There are 8 different programmable flush times.
Usually meet four different times as in the example image
is seen.
In the scavenging process of pre-programmed for a period of
5 sec.is to be activated all pumps, blowers and motors for mixing
all points in the tubes with disinfecting bleach to clean them.
Flashing manually select
Under the menu item "
More Settings
", select
"
flashing
".
Press the "
OK
" button, then select it with the cursor
up "
on
" confirm with "
OK
" button.
Now, the flashing process is running for 5 seconds.
Ozon at bath
Under the menu item "
More Settings
", press the
Up arrow key until you get to
.
Select the desired option.
You can use the ozone while bathing "
ON
" or "
OFF
"
choose.
Have you selected the
"ozone in the bath"
to
"OFF",
turns
the ozone device off as soon as a pump or blower turns on.
page 2
page 2
22:00
