SMS Alert Alarm / Plus
Page 4 of 4
How to program the SMS Alert to report to a 2
nd
, 3
rd
or 4
th
cellphone
If you want the SMS Alert to report to a 2
nd
cellphone, send
1234
and then the character
c
from a second
cellphone to the SMS Alert. To turn this feature
off
, SMS
1234
again and then the character
c
from the second
cellphone.
E.g: 1234 c
(There
must be a space
between
1234
and
c
. Do the same for
1234 d
(3
rd
), and
1234 e
(4
th
).
How to operate the relay outputs
The three outputs can be used for anything that requires remote controlling, for example to switch machinery
and equipment on and off or to open and close it, or to switch your alarm on and off.
SMS
1234
and the
command
to switch the relay outputs.
E.g: 1234 a on.
There
must be one space
between
1234
and
a
and
on,
or
1234
and
A
and
ON.
To switch relay A on, SMS:
1234 a on
,
and the same for
1234 b on, 1234 c on
To switch relay A off, SMS:
1234 a off
,
and the same for
1234 b off, 1234 c off
To switch
all
relays on, SMS:
1234 all on
, or else
1234 all off
To pulse relay A, SMS:
1234 ap
,
and the same for
1234 bp
,
1234 cp
Programming the input SMS strings (SMS characters):
You are able to programme the SMS messages you would like to receive on your cellphone/s when your alarm
goes off or when the inputs of the SMS Alert are triggered. Each input sends a different SMS to your
cellphone/s. Input one is usually connected to a siren through an interface relay. Input two is usually connected
to an alarm receiver so that it SMS you arm/disarm.
Important: Strings must not be longer than 20 characters, including spaces, commas, etc.
Example:
If you want Input 1 to SMS you “
John’s room !
” when the alarm is triggered:
1. SMS
1234 1
(One space between 4 and 1 and no space afterwards)
2. You get the following SMS back:
Str 1 ?
3. SMS “
John’s room !
” ,
4. You get back a SMS
Str1 OK.
Do not include 1234!
Input 1 : 1234 1
Input 2 : 1234 2
Input 3 : 1234 3
Input 4 : 1234 4
Input 5 : 1234 5
Input 6 : 1234 6
Input 7 : 1234 7
Input 8 : 1234 8
Input 9 : Panic (not programmable)
