3
TELink Layout Summary
:
Front of Unit
VOLUME UP & DOWN SWITCH - Used to control the 8Ω and 600Ω output level of the stored messages.
NIGHT SWITCH - This switch manually turns the NIGHT MODE to either ON, OFF or Scheduled.
NIGHT LED - Indicates units NIGHT ANSWER status.
STATUS LED - Indicates units operational STATUS.
SPEAKER - The SPEAKER switch can be turned ON and OFF to monitor audio playback. The switch has no
effect on the audio output connections on the rear of the unit. Switch should normally be kept OFF.
Rear of Unit
SURGE GND - Connects to the buildings electrical ground.
LINE IN - Connects to the incoming telephone line.
LINE OUT - Connects to phone or fax.
8Ω and 600Ω OUTPUT - This jack connects to the INPUT of the phone systems MOH port or PA system.
Depending upon the systems impedance use either the 8Ω or 600Ω jack -
DO NOT USE BOTH
!
12VDC - This is where the supplied 12VDC @ 500mA power pack is connected.
NIGHT
SPEAKER
STATUS
▲ ▼
SURGE
GND
LINE
IN
600Ω
MADE IN USA
8Ω
12VDC
500mA
+
OUTPUT
LINE
OUT
