7.
Mounting the Control Unit
NOTE: The control unit can be mounted on either side of the piano but the left side is
recommended as that is the only side where the grand pedal plug has access.
o
Locate the control box mounting screws in the kit assy. bag.
o
Place the control unit at the selected location slightly recessed from the edge of the keybed.
o
Mount the control box to the keybed.
o
If a PianoDisc player system is installed, use the PianoDisc / ProRecord cable connected
between the TFT Record port of the
PianoDisc CPU unit and the EXT port of the ProRecord
unit. The EXT port is located on the right side of the ProRecord control unit (see right side
drawing on the next page).
o
If a PianoDisc is NOT installed, use the 9VAC adapter on the back of the control unit (see rear
drawing below).
o
Secure all wires with the ties and clamps supplied in the assy. bag.
Rear of the Control Unit
⑫
⑬
⑭
⑮