o
Find the best location for the sensors on each pedal that is out of sight and best place for the least
amount of damage.
o
Mount each sensor with 2 screws.
o
Place a piece of reflective tape under each sensor.
o
Adjust the sensor to so the spacer tab just touches the lever.
o
Note that the pedal sensors need to be place so the lever
moves away
from the sensor.
o
Note that Ill. 9 shows a soft shift sensor that was mounted inside the action cavity. This was
done because there was no room to mount on the underside of the keybed.
o
Tie up and route the cables to the control unit.
Ill. 9 – Soft shift sensor
Illustration 10 – Sostenuto pedal sensor