ProRecord and ProScan Installation Procedure
for Grand Pianos
With Troubleshooting Guide
March 13, 2014
Installation Procedure
:
1.
Disassemble the piano
o
Remove the action from the piano.
o
Remove the stack and keys from the keyframe.
o
Place the key upside down on a bench supported by two long pieces of wood to level the bottom
of the keys.
2.
Placing reflective tape on keys 1 and 88
NOTE: The following procedure is the same whether a grand or vertical.
o
Locate the reflective tape and paper jig in the kit.
o
Starting with key 1 and 88, place the template on the front/bottom of the key and attach the
reflective tape. Do this on both keys.(See Ill. 1)
Note
: Because keys 1 & 88 are wider than other white keys, the reflective tape is place on one side
of the key to line up with the optical sensor. (See Ill. 1 and the template)
Illustration 1 – Locating reflective tape on keys 1 and 88
