manualshive.com logo in svg

PIAGGIO Beverly Tourer 250 i.e., Owner'S Manual, Page: 81 / 92

Share
Download
PIAGGIO Beverly Tourer 250 i.e. Owner'S Manual Download Page 81

WARNING

NEVER RIDE THE SCOOTER EQUIPPED WITH ACCESSORIES (TOP BOX AND/
OR WINDSHIELD) AT A SPEED HIGHER THAN 100 km/h.

THE SCOOTER CAN BE RIDDEN AT A HIGHER SPEED WITHOUT THE ACCES-
SORIES MENTIONED BEFORE WITHIN THE LIMITS ESTABLISHED BY LAW.

IF THERE SHOULD BE NON-PIAGGIO ACCESSORIES INSTALLED, OR AN AB-
NORMAL LOAD, OR IF THE SCOOTER IS NOT IN A GENERALLY GOOD CON-
DITION, OR WHENEVER WEATHER CONDITIONS DEMAND IT, SPEED SHOULD
BE REDUCED FURTHER.

WARNING

BE EXTREMELY CAREFUL WHEN INSTALLING AND REMOVING THE MECHAN-
ICAL ANTI-THEFT DEVICE ON THE VEHICLE ( U-SHAPED PADLOCK, DISK
BLOCK, ETC.).

MAINLY NEAR THE BRAKE PIPES, TRANSMISSIONS AND/OR ELECTRIC CA-
BLES, AN INCORRECT INSTALLATION OR REMOVAL OF THE ANTI-THEFT
DEVICE AS WELL AS LEAVING IT ON BEFORE STARTING THE VEHICLE CAN
SERIOUSLY DAMAGE ITS COMPONENTS, COMPROMISE THE CORRECT
FUNCTIONING OF THE VEHICLE AND USERS' SAFETY.

81

5 Spare parts and accessories

Summary of Contents for Beverly Tourer 250 i.e.





























































































Reviews:

No comments