PIAGGIO Beverly Tourer 250 i.e. Owner'S Manual Download Page 69

WARNING

THE USE OF A HIGH-PRESSURE WATER JET IS STRONGLY DISCOURAGED
FOR ANY ENGINE CLEANING OPERATION; HOWEVER, IF NO OTHER MEANS
ARE AVAILABLE, IT IS THEN NECESSARY TO:

• ONLY USE THE FAN JET.

• DO NOT PLACE THE NOZZLE CLOSER THAN 60 CM.

• DO NOT USE WATER AT TEMPERATURES OVER 40ºC.

• DO NOT USE HIGH-PRESSURE WATER JETS.

• DO NOT STEAM WASH.

• DO NOT DIRECT THE JET AT: THE CARBURETTOR, THE ELECTRIC CABLES,
THE SLOT DIFFUSERS IN THE TRANSMISSION COVER AND THE SCROLL
COVER.

CAUTION

NEVER WASH THE SCOOTER IN DIRECT SUNLIGHT, ESPECIALLY IN SUMMER
WHEN THE BODYWORK IS STILL HOT AS THE SHAMPOO COULD DAMAGE
THE PAINTWORK IF IT DRIES BEFORE BEING RINSED OFF. NEVER USE
CLOTHS SOAKED IN ALCOHOL, PETROL, DIESEL OIL OR KEROSENE FOR
CLEANING THE PAINTED OR PLASTIC SURFACES, IN ORDER NOT TO DAM-
AGE THE LUSTRE FINISH OR ALTER THE MECHANICAL PROPERTIES. USING
SILICONE-BASED WAX CAN DAMAGE THE PAINTED SURFACES, DEPENDING
ON THE SCOOTER COLOUR (SATIN COLOURS). FOR FURTHER INFORMATION
ON THIS MATTER, CONTACT AN AUTHORISED SERVICE CENTRE .

69

3 Maintenance

Summary of Contents for Beverly Tourer 250 i.e.





























































































Reviews: