PIAGGIO Beverly 300 i.e., Service Station Manual, Page: 111 / 333

- Get a + 2 l container in order to collect the coolant
and place it under the vehicle.
- Remove the pipe that feeds coolant into the pump
as shown in the picture and then empty the sys-
tem.
- Remove the engine coolant outlet pipe as indi-
cated.
- Disconnect:
- fuel piping and retainer clamp.
- injector connector.
- control unit connector.
- Remove the coolant outlet pipe from the engine
as indicated.
- Remove the spark plug cap.
- Remove the coolant temperature sensor con-
nector indicated in the picture.
Beverly Tourer 300 i.e.
Engine from vehicle
ENG VE - 111