6 Startup and Operation
Q-522 Miniature Stage
MP134E
Version: 1.0.1
33
In this Chapter
General Notes on Startup and Operation .................................................................... 33
Starting Up the Stage .................................................................................................. 36
6.1 General Notes on Startup and Operation
CAUTION
Risk of electric shock if the protective earth conductor is not connected!
If a protective earth conductor is not or not properly connected, dangerous touch
voltages can occur on the Q-522 in the case of malfunction or failure of the system. If
touch voltages exist, touching the Q-522 can result in minor injuries from electric
shock.
Connect the Q-522 to a protective earth conductor (p. 21) before start-up.
Do
not
remove the protective earth conductor during operation.
If the protective earth conductor has to be removed temporarily (e. g. in the case
of modifications), reconnect the Q-522 to the protective earth conductor before
starting it up again.
CAUTION
Burning from hot surface!
The surface of the Q-522 and its vicinity can heat up during operation. Touching the
Q-522 and surrounding parts can result in minor injuries from burning.
Cool the Q-522 so that the temperature of its surface and surrounding parts does
not
exceed 65 °C.
If sufficient cooling is not possible: Make sure that the hot Q-522 and its
surrounding parts
cannot
be touched.
If sufficient cooling and protection against contact are not possible: Mark the
danger zone in accordance with the legal regulations.
6
Startup and Operation
