7 Maintenance
P-88x.x5 Piezo Actuator
PZ266E
Version: 1.1.0
33
In this Chapter
General Notes on Maintenance ................................................................................................... 33
Cleaning the P-88x.x5 .................................................................................................................. 33
7.1
General Notes on Maintenance
The P-88x.x5 is maintenance-free.
7.2
Cleaning the P-88x.x5
Requirements
The P-88x.x5 is discharged (p. 30) and short-circuited (p. 31).
The P-88x.x5 is disconnected from the electronics.
Cleaning the P-88x.x5
When using in a vacuum: Touch the piezo actuator only with powder-free nitrile or latex
gloves.
Depending on the application, clean the piezo actuator as follows:
a)
Clean with a lint-free cloth (only when using outside of the vacuum):
-
Clean the surfaces of the P-88x.x5 with a lint-free cloth that is dampened with a
mild cleanser (e.g., isopropyl alcohol).
b)
Cleaning in an ultrasonic bath:
-
Reduce the energy input to the necessary minimum.
-
Only use isopropyl alcohol or ethanol as cleaning fluid.
-
Make sure that the cleaning time is 5 minutes.
-
After cleaning, dry the P-88x.x5 completely in a drying cabinet (recommended
duration: 30 minutes at 40 °C).
7
Maintenance