4 Unpacking
P-88x.x5 Piezo Actuator
PZ266E
Version: 1.1.0
13
INFORMATION
If the piezo actuator is to be used in a vacuum, attention must be paid to the corresponding
cleanliness. At PI, all parts are cleaned before assembly. During assembly and calibration,
powder-free gloves are worn. Afterwards, the piezo actuator is wiped clean once again and
then shrink-wrapped in vacuum-compatible film.
When handling the piezo actuator, wear powder-free nitrile or latex gloves.
If necessary, wipe the piezo actuator clean after unpacking.
1.
Unpack the P-88x.x5 with care.
2.
Compare the contents with the scope of delivery according to the contract and the
delivery note.
3.
Inspect the contents for signs of damage. If any parts are damaged or missing, contact
our customer service department (p. 37) immediately.
4.
Keep all packaging materials in case the product needs to be returned.
4
Unpacking