7 Maintenance
M-232 Linear Actuator
MP105E
Version: 1.2
33
7.1 General Notes on Maintenance
NOTICE
Damage due to improper maintenance!
The M-232 can become misaligned as a result of improper maintenance.
Do not loosen any sealed screws.
7.2 Lubricating the M-232
Depending on the operational conditions and the period of use of the linear actuator,
the following maintenance measures are required.
Spreading lubricant
If you operate the M-232 continuously on a small travel range (<20% of the
entire travel range), perform a maintenance run every 2000 motion cycles
across the entire travel range.
Lubrication
Under laboratory conditions, the linear actuator needs extra lubrication in exceptional
cases only. For continuous industrial use the lubrication intervals must be defined
individually.
Do not lubricate the M-232 without consulting our customer service
department (p. 37).
To lubricate, follow the instructions given in the maintenance manual which
you can obtain from our customer service department.
7
Maintenance