5 Installation
20
Version: 1.2
MP102E
M-230 Linear Actuators
−
Corresponding programming of the controller
−
Emergency off switch
−
Automatic shutdown systems
Avoid or label danger areas that result from the installation of the actuator and
from use, in accordance with the legal regulations (e.g. risk of crushing in the
case of heavy moving loads, fast actuator motions and/or high drive torques).
The complete dimensions of the actuator and relevant individual parts can be found in
the figures in the section Dimensions (p. 36).
5.4 Installing the Linear Actuator in a Mechanical
Mounting
NOTICE
Incorrect tightening torque of the mounting nut!
The motion of the pusher can be hindered by a mounting nut that has been tightened
too strongly. This reduces the positioning accuracy.
Tighten the mounting nut to a maximum torque of 1.7 Nm.
INFORMATION
To achieve an optimum repeatability, the mounting shaft must not have any
backlash.
During mounting, make sure that there is a faultless connection between the
actuator and the mechanical mounting.