PI M-126, User Manual

Page: 26 / 53

5 Installation
22 Version: 3.0.0 MP42E M-126 Precision Microtranslation Stage
5.6 Connecting the Power Supply to the M-126
Connecting a power adapter is only necessary for the M-126.PDx models.
Requirements

The power cord is not connected to the power socket.
Tools and accessories

Supplied components:
−
24 V wide-range-input power supply
−
Adapter for the power supply connection; barrel connector 5.5 mm x 2.1 mm to
Mini XLR3 (f)
− Power cord

If one of the components supplied for connection to the power source has to be
replaced: Use a sufficiently measured and certified replacement component. Details:
− Power supply: Output 24 V DC, maximum output current 2 A
− Power cord: Three wires, cable cross section at least 3 x 0.75 mm
2
(3 x AWG18),
maximum length 2 m
Connecting the power supply to the M-126

Connect the Mini XLR3 connector (f) of the adapter to the Mini XLR3 panel plug of the
M-126.

Connect the barrel connector of the adapter to the barrel connector socket of the
power supply.

Connect the power cord to the power supply.