1 About this Document
2
Version: 1.3
MP149E
L-220 Linear Actuator
1.3
Definition of Terms
Term
Explanation
Load capacity
Maximum load capacity in the vertical direction when the linear
actuator is mounted horizontally. The contact point of the load is at
the center of the motion platform.
Max. push/pull force Maximum force in the direction of motion. Some stages may have
higher forces but with limited lifetimes. In the case of vertical
mounting, the specified value (s. 29) for models without a gearhead
and brake only applies when the servo mode is on.
Rotary encoder
The rotary encoder is a sensor for capturing changes in position.
Signals from the sensor are used for axis position feedback. After the
controller is switched on, a reference point definition must be
performed before absolute target positions can be commanded and
reached.
1.4
Further Applicable Documents
The devices and software tools from PI that are mentioned in this documentation are described
in separate manuals.
Product
Document
L-220
MP159EK Short instructions for
L-2xx/MA-35/MP-20/MP-15 linear actuators
C-863.12 *
MS249E User manual
C-663.12*
MS241E User manual
C-884*
MS243E User manual
C-885**
C885T0002 User manual
C-663.12C885*
C663T0004 User manual
C-863.20C885*
C863T0005 User manual
C-885*
C885T0002 User manual
C-663.12C885*
C663T0004 User manual
SMC Hydra
Technisches Benutzerhandbuch SMC Hydra
(SMC-Hydra CM TT.doc)
* Depending on the ordered controller. Further documents included in the data carrier(s)
provided with the controller.