6 Start-Up
20
Version: 1.3
MP149E
L-220 Linear Actuator
NOTICE
Damage from unsuitable controllers and PC software!
Unsuitable controllers and PC software can cause damage to the actuator.
If you use controllers and software from other manufacturers,
before
starting up
the actuator, check the technical data to make sure that they are suitable!
INFORMATION
The maximum velocity for a linear actuator with a stepper motor should be determined in the
application. If the commanded velocity is too high, the stepper motor might stop without the
controller detecting this state.
INFORMATION
For models with DC motors:
Improper setting of the servo-control parameters can impair the performance of the L-220.
This can have the following consequences:
Oscillation
Imprecise approach of the position
Settling time is too long
If the performance of the L-220 is not satisfactory, check the settings for the servo-control
parameters of your controller.
INFORMATION
Moving the pusher outwards corresponds to the positive direction of motion.