Manual MCC-1
MA 1249-A009 EN
32
6.5.1 USB Interface
MCC-1 and PC can be directly connected by the USB cable type A-B. The USB port of the
PC (type A) is directly connected to the USB port of the controller (type B).
Fig. 19: X5 Com: USB port type B (DIN IEC
61076-3-108)
Fig. 20: Wiring scheme PC
MCC-1 by
cable A-B
USB Driver-Installation (Windows)
Insert the Phytron-CD and open the folder
USB driver
by the Windows Explorer.
Select the .
exe
-program which goes with your system software and start it by double
click. The following window is shown on desktop after a successful installation:
Connect the MCC-1 directly or via USB converter to the USB port of your PC by USB
cable. .
For checking the correct USB-driver installation, continue as follows:
Start the device manager by clicking
Start
Settings
System control
and double-
click on
System
. Then select the
Device manager
with the
Hardware
tab. The USB
components can be found in
Computer
Ports
and in
Universal Serial Bus
Controller
. Here the new USB component is shown:
USB Serial Port (Com X)
.
You’ll find information about the driver installation for the chip FT232R and more
drivers for Linux and MAC on http://www.ftdichip.com.
