phyBOARD-Wega AM335x [PB-00802-xxx]
60
©
PHYTEC Messtechnik GmbH 2014 L-792e_1
3.2.3.1
Software Implementation
The two 10/100 Mbit Ethernet interfaces are being provided as network interfaces
eth0
with static IP 192.168.3.11 and
eth1
with static IP 192.168.4.11 by default.
Both interfaces offer a standard Linux network port which can be programmed using the
BSD socket interface.
3.2.4
USB Connectivity (X15 and X42)
The phyBOARD-Wega provides one USB host and one USB OTG interface.
USB0 is accessible at connector X42 (USB Micro-AB) located at the back side of the
phyBOARD-Wega. It is configured as USB OTG. USB OTG devices are capable to initiate a
session, control the connection and exchange host and peripheral roles between each
other. This interface is compliant with USB revision 2.0.
USB1 is accessible on the top at connector X15 (USB Standard-A) and is configured as USB
host.
Figure 7:
Components supporting the USB Interfaces
LED D8 displays the status of USB0_VBUS and LED D7 the status of USB1_VBUS.
Numerous jumpers allow to configure the USB interfaces according to your needs. Please
refer to
for more information.
