Accessing the phyBOARD-Regor Features
PHYTEC Messtechnik GmbH 2018 L-823e_2
11
and
show the pin assignment of the connector X1.
Pin Signal
Description
1
X_VIN
+24 V DC ±10 % power supply
2
GND
Ground
3
-
NC
4
-
NC
5
-
NC
Table 6:
Pin Assignment of the 5 position Phoenix Contact MINI COMBICON Base Strip X1
2.2.1.2
Power LEDs D62, D63, and D68
The LEDs D62,D63, and D68 indicate the presence of the 3.3 V (D63, D68) and 5 V (D62)
supply voltage generated from the input voltage.
The presence of the 3.3 V voltage generated by the LDO is indicated by D68. This voltage is
verified by a voltage supervisor IC and is interconnected to the phyBOARD-Regor to supply
its components. The presence of the approved 3.3 V phyBOARD-Regor supply voltage is
indicated by D63.
shows the locations of the three LEDs.
