APPENDIX 2
Installation Instructions for WB-1 and WB-2 Warming Blankets
for TCAT-2LV and TCAT-2DF Controllers
FIR infrared technology is one of the most safe and effective methods for staying warm and for animal
therapy in the 21st century. The cells of all life forms on earth will naturally activate and flourish when
radiated by FIR. FIR technology is a special technology that guarantees the full effects of heat radiation
and penetration. Infrared warming can penetrate cells deep under the skin, up to 3 or 5 cm. FIR technol-
ogy assists with bone calcification and heat moxibustion. It assists in speeding up blood circulation so
that nutrients are supplied to critical parts of the body more quickly. It also speeds us metabolism,
strengthening the immune system against disease. Through infrared warming, it will also diminish
inflammation, relieve aches and pains, kill bacteria, reduce bruising and heal wounds.
PRODUCT FEATURES
The WB-1 and WB-2 can be used as warming devices or assist in body therapies. They are made of car-
bon fiber materials that can radiate strong FIR energy. They are composed of a soft folding and durable
material and are extremely water resistant. The material cannot become oxidized in air. The WB-1 and
WB-2 have large warming capacities, small volume and are very light-weight.
TECHNICAL DATA
Rating Voltage:
7.4V
Overall Dimensions:
WB-1: 8 x 6 inches
WB-2: 14 x 14 inches
Output Power:
15W Maximum for WB-1
25W maximum for WB-2
Efficiency of output power:
>98%
OPERATING PROCEDURE
1)
Connect the WB-1 or WB-2 extension lead to the rear of the TCAT-2LV or TCAT-2DF con-
troller supplied with it. Do not connect to any other controller than the one with which it was originally
supplied. Attach the round 7-pin connector to mating socket on rear of the controller. The connector is
mechanically polarized to prevent incorrect insertion. Once inserted, rotate the outer ring at the tip of the
connector 90° in a clockwise direction to lock in place.
2)
Place the WB-1 or WB-2 in a location to begin warming or so an animal can rest on it. Do not
apply the warming blanket to a haemophile or to animals that tend to bleed.
3
If any problems are encountered, do not disassemble or try to refit the device yourself. Please
stop using the device immediately to avoid further problems during application. The WB-1 and WB-2
are designed especially for animals and cannot be used for other purposes.
4)
To clean the warming blanket just wipe it with an alcohol soaked towel.
If you have questions about a specific application, please e-mail us at [email protected] or call our
engineering department at 1-800-452-8510 or 1-973-779-5577, ext 115.
WARRANTY
Physitemp Instruments Inc warrants this product to be free of defects in material or work-
manship for a period of 12 months from date of shipment. Repair or replacement will be
made at no charge at the discretion of Physitemp if the defect is not the result of misuse or
abuse. Physitemp accepts no consequential liability for delay in delivery, alleged faulty per-
8
QX P:\CW shared\TCAT\EB TCAT-2DF PAK 400 Rev 2 3/5/13
