PHYSITEMP TCAT-2DF Operating Manual Download Page 6

6.0

MAINTENANCE, WARRANTY AND SERVICE

6.1

WARRANTY

Physitemp Instruments Inc. warrants this system to be free from defects in material  or workmanship for
12 months from date of shipment. Repair or replacement will be made at no charge at the discretion of
Physitemp if the defect is not the result of misuse or abuse. Physitemp accepts no consequential liability
for delay in delivery, alleged faulty performance of the product or any other cause.

Cables and probes are considered expendable and are not covered by this warranty.

6.2

REPAIRS AND RECALIBRATION

For technical applications information on this instrument contact us at:

Tel:

1-800-452-8510 or 1-973-779-5577

Fax:

1-973-779-5954

E-mail: [email protected]

In the event that any part of this system is to be returned for repair or recalibration, please pack it with
care (in the original packing material if possible) and send it prepaid to:

Service Department
PHYSITEMP INSTRUMENTS INC
154 Huron Avenue
Clifton, NJ 07013  USA

Please include with the instrument:

1.   

A note describing any problems encountered

2.

The name and telephone number of a person we can contact

3.

The complete return address for shipping.

For your protection, please pack the item carefully and insure against possible damage or loss.
Physitemp will not be responsible for damage resulting from careless packaging. Please return freight
prepaid.

6

QX P:\CW shared\TCAT\EB TCAT-2DF PAK 400 Rev 2     3/5/13

Summary of Contents for TCAT-2DF










Reviews: