36
NEOX™ Tilt-in-Space
ENGLISH
13. Wheel lock
13.1 Wheel lock installation
The wheel size will determine the
location of the mid-wheels lock.
The installation of the wheel lock
must be made when the rear wheels
are installed. Refer to section 7.1 to
install the mid-wheels.
1. Determine the wheel lock
location according to the
adjustment hole;
2. Using a 13 mm Allen key secure
tightly the wheel lock with bolts
and nuts
A
.
Figure 48: Wheel Lock
13.2 Adjust the tension applied to the wheel by the wheel lock
1. Loosen bolt
B
using a 4 mm Allen key;
2. As needed, move the wheel lock assembly forward or backward;
3. Tighten bolt
B
;
4. Verify if the desired tension is obtained and ensure the wheel locks
properly and securely;
5. Firmly tighten.
13.3 To apply brakes
1. Pull the handle
C
backward to apply the brake;
2. Push the handle
C
forward to release the brake.
Figure 49: Adjustment and
Applying wheel lock
Adjustment hole
