15
Revision 3
Janvier 2015
Owners manual
ENGLISH
Always check the steadiness of the wheelchair. It may require a
modification of the seat or the mid wheel positioning device.
6. Rear wheels
6.1 Rear Wheel installation and height adjustment
The wheels available for the NEOX™ are from 12" to 24" and 6 positions are
possible for the height.
Follow these steps to install the rear wheel:
1. Insert the positioning device
B
in the hole corresponding to the desired
height (Figure 12);
2. Slide axle
A
inside the positioning device
B
;
3. Insert nut
C
at the end of the axle
A
;
4. Tighten nut
C
with a ¾" wrench while holding the axle
A
with a ¾" ratchet.
Note – To simplify this process; place the NEOX
™
on a flat surface such as a table or a
bench.
Figure 12 : Rear Wheel Installation
6.2 To Uninstall the rear wheel
1. Loosen nut
C
with a ¾" wrench while holding the axle
A
with a ¾" ratchet;
2. Remove nut
C
at the end of the axle
A
;
3. Slide axle
A
outside the positioning device
B
;
4. Remove axle
A
from the wheel.
