19
Revision 3
Janvier 2015
Owners manual
ENGLISH
Figure 18 : Front wheel installation
7. Front Wheels
7.1 Front wheels installation
To change the wheels, simply follow these instructions:
1. Determine the front wheel position on the fork. Refer to section 5.
2. Insert screw
A
in the corresponding hole with both spacers
B
between the
wheel and fork on each side.
3. Put bolt
C
at the end of screw
A
and tighten with two 13 mm wrenches.
This step is required when a front wheel position or seat height has been changed.
It will help to always have a straight line, therefore easier propulsion. Please refer
to section 5.
The modification of a wheel of 1" for a wheel of 2 ", or vice versa, requires the
acquisition of an adapted fork for each case.
Once tightened, the wheel must turn easily
A
C
B
B
