POWER OPTIONS
BEFORE YOU START
1. Battery: 4 x AA alkaline
2. Power Adapter: A 6V 1000mA AC adapter
can be used with this device
(not included)
Adapter socket pictured at right
CAUTION
Do not use any other type of battery
or adapter as it may harm the unit.
Installing and replacing batteries
1. Slide off the battery cover.
2. Install the batteries by matching the
correct polarity, as shown.
3. Replace the cover.
Replace the batteries if any of the following should occur:
• The indicator appears
• The display appears dim
• The display does not light up
CAUTION
Selecting memory zone and setting date,
time & unit of measurement
It is important to set the clock before using your blood
pressure monitor, so that a time stamp can be assigned
to each reading that is stored in the memory.
1.
When the unit is off,
press “SET” button
to activate system
settings mode.
2.
Select your desired memory zone using the “+” and “–”
butttons.
There are 4 zones, each zone can store up
to 30 readings.
SET
SET
SET
SET
SET
1
3
2
4
9
8
Physio logic essentia Manual (ENG)
106-930
921-106930E
21.5 cm x 14.5 cm
21.5 x 14.5 cm (folded: 10.75 x 14.5 cm)
Instruction Booklet
Travis Fraser
TM
X
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
