31
AUTO
FN
Automatic FN identification is active
Ferr
Ferrous mode is active (for iron/steel)
Non-Ferr
Non-Ferrous mode is active (for non-ferrous metals)
μm
measuring unit is µm
mils
measuring unit is mils
15.
Default settings
This section describes the gauge settings at initial start-up, after total reset or if the batteries have been removed for a
longer period of time.
Readings, statistics, calibration settings, limit values and zero offset value will be deleted (both F- and N-mode). Works
calibration is activated (both F- and N-mode). The gauge is set to automatic FN identification (FN type only). Reset of
all options to the first menu item, e.g.
μm
or
Beeper ON.
In addition, after a battery interruption lasting more than 20 seconds the user is prompted to select the language.
16.
Protect the environment
Your gauge contains a number of different reusable materials.
Please do not throw your instrument away with the normal household waste but bring it to a special waste disposal
depot for electrical equipment (material disposal depot).