21
2.
press this key;
Measuring unit
appears on the display.
3.
press this key;
Measuring mode
appears on the display.
4.
press this key; the actual setting, e.g.
Auto FN identification,
appears on the display.
5.
use these keys to select the desired method:
Auto FN identification
,
Ferrous (F)
or
Non-
Ferrous (N).
6.
press this key to confirm your choice. The chosen mode is displayed, e.g.
Measuring mode
FN selected
, followed by the start screen with the four dashes – – – – .
7.3.
Selection of switch-off modes
With this menu item you can choose between permanent operation of the gauge or auto-shut-off after 90 seconds
without measurement or handling.
Procedure:
1.
press this key twice;
Options
appears on the display.
2.
press this key;
Measuring unit
appears on the display.
3.
press this key twice;
Switch-off mode
appears on the display.
4.
press this key.
5.
use these keys to select the desired mode:
Auto switch-off
or
Permanent operation.
6.
press this key for confirmation; your choice, e.g.
Permanent operation selected
, appears
briefly on the display followed by the start screen with the four dashes – – – – .