18
3.
press this key;
Statistics deleted
appears briefly on the display followed by the start screen
with the four dashes – – – – .
6.
Limits (3rd menu item)
This section describes the setting of limit values. To monitor your readings, you can set an upper and a lower limit value.
This setting is useful:
during the measurement
for the evaluation of readings later on when displaying the single values
during the analysis of the readings with the PC.
If the reading is outside of the limit values, you will hear a characteristical beep, and an indicator ▼ or ▲ at the top of
the display shows whether the reading fell below or exceeded the limit values.
6.1.
Setting of limit values
Procedure:
1.
press this key three times until
Limits
appears on the display.
4.
press this key;
Limits setting
appears on the display.
5.
press this key;
Set lower limit
appears on the display and a number as suggestion for the
lower limit value.
6.
use these keys to adjust the lower limit value; with continued pressing of these keys the set
value increases or decreases faster.
7.
press this key;
Set upper limit
appears on the display and a number as suggestion for the
upper limit value; the upper limit value must be at least 10 µm higher than the lower limit
value.
