3 .
I N S T A L L A T I O N
C o n n e c t i n g t o t h e I P P B X
29
5.
Flip the locking mechanism up and over the black cap, pushing it back until it clicks into place.
CAUTION
:
DO NOT remove the black cap until you are ready to insert the fiber optic cable.
To remove an SFP module:
1.
If required, remove the fiber optic cable from the SFP module.
2.
Unlock the SPF module:
-
If the SFP module is in port
Gbic 1
, flip the handle down to unlock the module.
-
If the SFP module is in port
Gbic 2
, flip the handle up.
3.
If required, remove the protective cap from the end of the SFP module.
WARNING
:
DO NOT look into the SFP connector when it is installed in a Gbic port, as the
laser beam can cause serious eye injury.
4.
Slide the SFP module out of the
Gbic
port, using its handle.
Note
: The SFP module cannot be removed from the port if its protective cap is on.
