User Manual
Tool Catcher
OPS-4428 Rev A
3
2.1 Fishing Neck Limitations
Fishing necks generally conform to an unofficial industry standard, but there
are some products on the market that fail to comply. The fishing neck head
length (Z) should therefore be measured to confirm that it will fit inside the gap
between the two sets of finger rings. If the head length (Z) is larger then it will
be necessary to remove the upper set of fingers and replace it with the Spacer
Ring, bought seperately (see Section 8.1.2)
B
C (Ref)
Z Max
0.531 in
13.49 mm
0.47 in
11.94 mm
1.744 in
44.30 mm
0.687 in
17.45 mm
0.59 in
14.99 mm
1.667 in
42.34 mm
0.750 in
19.05 mm
0.62 in
15.75 mm
1.637 in
41.58 mm
1.000 in
25.40 mm
0.81 in
20.57 mm
1.529 in
38.84 mm
1.187 in
30.15 mm
1.06 in
26.92 mm
1.456 in
36.98 mm
1.375 in
34.93 mm
1.19 in
30.23 mm
1.388 in
35.26 mm
1.750 in
44.45 mm
1.50 in
38.10 mm
1.270 in
32.26 mm
2.313 in
58.75 mm
2.06 in
52.32 mm
1.125 in
28.58 mm
2.750 in
69.85 mm
2.50 in
63.50 mm
1.040 in
26.42 mm