It is forbidden to dump this material casual. If it needs to be scrapped, please
solidify the material and hand it to the cleaning team according to the “general
resources”.
Store at room temperature (15 - 35 ° C) in a dry environment.
Safety advice
If it's convenience, wear gloves, goggles, and long-sleeved clothing to handle the
resin, and wash your hands with detergent after each operation.
This material is forbidden to eat and swallow. If it happens, please to take medical
treatment as soon as possible.
Avoid contact with the eyes. If you touch it, rinse with plenty of water and please
to take medical treatment as soon as possible.
The material is slightly irritating to human skin. If it induces allergies, please stop
using this material immediately.
Summary of Contents for Transform
