8
2. Use the Selection Dial to set Automatic Zoom Mode (Azoom) or set the
manual zoom value (Mzoom).
3. When finished, press the OK Button to exit.
Please note:
1. When in Azoom and the flash head is raised or rotated from the 0 degree
standard forward position - the flash zoom will set itself to 50mm. “- -” will be
displayed on the LCD. The flash zoom will not change if the head is lowered to
-7 degrees.
2. Azoom will work ONLY when the flash head is set to either 0 or -7 degrees.
3. When using Mzoom and the flash head is raised or rotated from the 0
degree standard forward position - the flash zoom will not be changed from
the previous setting.
4. Flash Zoom can be adjusted when the head is raised or rotated by switching
to Mzoom Mode and making desired adjustments.
Test Button
Pressing the test Button will trigger the flash. This can be used for metering (in
manual Mode only). In Wireless Master Mode pressing the test Button will fire
slave flashes on the same channel, group and matching ID being controlled by
the Master flash.
Modeling Flash
1. Pressing the camera depth-of-field preview Button (if available) will fire the
flash continuously for 1 second. This Modeling Flash is useful in seeing lighting
effects and balance on the subject. (Please see your camera manual for more
information on the DOF Button and Button assignment.)
2. Modeling Flash is available in all Modes, TTL, Multi and Manual.
Please note:
1. Overheating and damage can result from excessive use of the Modeling
Flash. Do not use more than 20 times in succession.
2. When overheating the flash will automatically increase charging time until
the flash temperature has decreased.
Autofocus (AF) Assist Light
1. In low light/contrast situations the Phottix Juno TTL built-in Auto Focus Assist
Light will illuminate to assist with AF. The AF Assist Light on the front of the flash
will project a focusing target on the subject.
2. AF Assist Light Functions can be set to on or off (see C.Fn-03 below).
Note:
AF assist light will not work when flash is in Receiver or Slave Mode.
