En
INSTRUCTION MANUAL
17
2. Press
Button to enter Manual Power Adjustment Mode.
3. Use the “Selection Dial” to adjust the Power Level.
4. Press
to exit.
Note: Half press the camera Shutter Button will display t he effective manual
flash power range on the Flash LCD.
Auto-Metering Mode
Auto Metering Mode can be used similarly to a light Meter to measure and set
the flash power needed for proper exposure.
To use:
1. While in Manual (M) Mode – press and hold the OK Button for 2 seconds.
2. Auto Metering will be display on the flash LCD
3. When a photo is taken the flash will automatically calculate the manual
power level and display it on the back of the flash.
4. Subsequent photos will be taken at this power level.
5. To re-meter press and hold the OK Button for 2 seconds to re-enter Auto
Metering Mode.
Multi: Stroboscopic Mode
With Multi Stroboscopic Mode a series of rapid flashes will be fired. The flash
count, frequency and power of these flashes can be programmed on the Phottix
Juno TTL. Multi Mode is useful for capturing multiple images of a moving
subject in the same photo and other special effects. The frequency of the effect
(in Hz. - number of flashes per second), the total number of flashes and output
levels can be set.
