Photron IDP-Express R2000, Hardware Manual

Page: 34 / 53

22
Chapter. 3 Recording
3.8. Edge Enhancement Function
With the system's edge enhancement setting, you can enhance the edges in the recorded image in
three steps.
Menu Display Contents
OFF Edge enhancement off.
LEVEL1 Edge enhancement set to weak.
LEVEL 2 Edge enhancement set to medium.
LEVEL 3 Edge enhancement set to strong.
3.9. Setting the Sensor Gain
The sensor gain setting adjusts the amplitude voltage inside the sensor. By increasing this setting,
when recording in low light, the signal is amplified and the camera can take a higher gain (brighter)
image. However, by amplifying the signal, the noise component also increases, resulting in
decreased image quality, or more noise.
The sensor gain can be set in two steps according to the object being recorded. The content of each
item is listed in the chart below.
Menu Display Contents
x 1 Sets the sensor gain to standard.
x 3 Sets the sensor gain to 3x.