Photron FASTCAM SA7, Hardware Manual

Page: 58 / 87

Chapter. 3 Recording
44
3.17. IRIG-sync Operation
This camera system supports IRIG-sync operation, in which the sensor drive signal is synchronized
with the input of IRIG-B signal.
How IRIG-sync operation works?
In IRIG-sync operation, the image sensor is driven by the timing signal shown below. Exposure to the
sensor ends at the start of the IRIG-1PPS signal
IRIG-B : IRIG code that is input to the camera
IEIG-1PPS : 1PPS timing of the IRIG code
EXPOSURE : Exposure to the camera sensor (exposure is indicated by high duration)
CAM_V : Camera
’s vertical sync signal

For the settig about the function, refer to the "Photron FASTCAM Viewer User's Manual" or the
"LCD Remote Controller User's Manual".
IRIG-B
IRIG - 1PPS
EXPOSURE
CAM_V