Photron FASTCAM-PCI R2, Hardware Manual

Page: 31 / 55

FASTCAM-PCI R2 Hardware Manual
- 31 -
2.5. Random Reset Trigger Mode
The FASTCAM-PCI R2 supports the Random Reset Trigger Mode. Software set up is needed to
use this mode and this section describes how to do it. Refer to the Software User’s Manual for
details of software operation.
1) Select a camera from the camera selection pull-down box.
2) Press the ‘More’ button to set up details.
3) Check the ‘Random Reset Trigger‘ box.
Note: Random Reset Trigger Mode can only be enabled in Start and Random recording modes.